Filter-holder made of transparent polycarbonate. It can be use with autoclave. A silicone gasket avoids the leak of liquid. This filter-holder can be use with pressures till 7 bar, It is used as habitual on the filtration of aqueous samples. It works with membranes of 25 mm
diameter.
Connectors
Inlet Female luer lock
Outlet Male luer slip
Flow rate with water (ml/min /cm2 )p= 1 bar | 100 Kpa aprox.:
0.22 µm membrane 70 ml/min aprox.
0.45 µm membrane 110 ml/min aprox.
Chemical compatibility: The same as the polycarbonate and silicone
Materials: Polycarbonate in the pieces and silicone in the gasket (20.5 x 26.5 mm)
Diameter: 25 mm
Filtration area: 3 cm2 Maximum pressure: 7 bar (700 kPa, 101,57 psi)
Dimensions of membrane filter: 25 mm diameter
Hold-up volume < 0.3 ml before reaching the point of bubble 0.6 ml before
Sterilization: Autoclaving (max. 121ºC)
