Great quality filter-holder made of transparent polycarbonate. It can be used with autoclave. It also has a silicone gasket to avoid a leak of liquid.
It can be decrease with pressures till 7 bar and it can be filtered in both directions.
Connectors
Inlet Female Luer lock
Outlet Male luer slip
Flow rate with water (ml/min /cm2 )p= 1 bar | 100 Kpa aprox.:
0.22 µm membrane 18 ml/min aprox.
0.45 µm membrane 35 ml/min aprox.
Chemical compatibility: The same as polycarbonate and silicone
Materials: Polycarbonate (housing) and silicone (flat gasket)
Diameter: 13 mm
Filtration area: 0.5 cm2 Weight: 13 g
Max. pressure: 7 bar (700 kPa, 101,57 psi)
Membrane filter measure: 13 mm diameter
Hold-up volume < 0.2 ml after reaching bubble point, 0.3 ml before
Sterilization: Autoclaving (max. 121ºC)
